AS R 5S Installation guide

Aria, Asteria, Gardenia, Hiacynta, Lira, Lobelia, Petunia, Rosemary, Viola

How easy is to install an Aprile handle?

Door Handle Installation Video

The set includes:
– a pair of handles – left and right; combined with roses;
– 2 pcs. of mounting roses (so-called mounting adapters);
– handle stem 8×8 mm (two-part);
– 2 pcs. of through bolts M4;
– set of allen screws with a spanner;
– set of wood screws.

Assembly of the handle::
1. Drill 2 Ø 7 mm holes on both sides of the door, spacing 38 mm, for through bolts. Do not drill through
the door on one side. Ream the holes on both sides to avoid damaging the outer layer of the door. You
can either use a mounting template to mark the holes or use a mounting adapter with an element
stabilising stem. After preparing the screw holes, break out the stem stabiliser from the adapters and
join with metal ring.
2. Use the supplied bolts and screw the two mounting adapters together. These elements should be
oriented with the safety tab downwards. The adapters are universal (right/left).
3. You can additionally stabilise the mounting adapters with wood screws.
4. Fold the stem and insert it into the door lock with the notch facing downwards so that the length of the
stem is the same on both sides of the door.
5. Place and press the handle into the adapter and stem thus installed. The handle shall be flush with the
door.
6. Fasten the handles from below with allen screws.

The set includes:
– 2 pcs. rosette covers;
– 2 pcs. of mounting roses (so-called mounting adapters consisting of a metal ring and synthetic part);
– 2 pcs. of through bolts M4;
– a set of wood screws.

Assembly of the rosette:
1. Drill 2 Ø 7 mm holes on both sides of the door, spacing 38 mm, for through bolts. Do not drill through
the door on one side. Ream the holes on both sides to avoid damaging the outer layer of the door. You
can either use a mounting template to mark the holes or use a mounting adapter with an element
stabilising stem. After preparing the screw holes, break out the stem stabiliser from the adapters and
join with metal ring.
2. Use the supplied bolts and screw the two mounting adapters together. These elements should be
oriented with the safety tab downwards.The adapters are universal (right/left).
3. You can additionally stabilise the mounting adapters with wood screws.
4. Place and press the rose onto the adapter thus installed. The rose should fit flush with the door.

The set includes:
– 2 pcs. rosette covers;
– 2 pcs. of mounting roses (so-called mounting adapters consisting of a metal ring and synthetic part);
– 2 pcs. of through bolts M4;
– a set of Allen screws and spanners
– WC knob with handle stem 4×4 mm (it is possible to order an additional reduction);
– a set of wood screws

Assembly of the rosette:
1. Drill 2 Ø 7 mm holes on both sides of the door, spacing 38 mm, for through bolts. Do not drill through
the door on one side. Ream the holes on both sides to avoid damaging the outer layer of the door. You
can either use a mounting template to mark the holes or use a mounting adapter with an element
stabilising stem. After preparing the screw holes, break out the stem stabiliser from the adapters and
join with metal ring.
2. Use the supplied bolts and screw the two mounting adapters together. These elements should be
oriented with the safety tab downwards. The adapters are universal (right/left).
3. You can additionally stabilise the mounting adapters with wood screws.
4. Place and press the rose onto the adapter thus installed. The rose should fit flush with the door.
5. Slide the stem into the door lock. For magnetic locks, use a reduction to change the diameter of the
hole for the WC stem.
6. Screw the knob of the WC rose to the stem with the Allen screw.

Looking for instructions for a different model?